Puck Handset - ORTAL 98HH Series Installation And Operation Manual

Puck Handset

Control Option
Puck Handset
IMPORTANT: For safety/communication purposes, Puck handset must be located within 26 feet of the receiver.
NOTE: Any device that functions using the same radio frequency as the handset will be affected when handset is in
use.
Turning the Fireplace On
1. Press the button until you hear continuous beeping, and a blinking series of lines confirms
the start sequence has begun; release buttons.
2. Main gas flows once pilot ignition is confirmed.
3. The system automatically goes into Manual Mode after main burner ignition.
NOTE: When pilot ignition is confirmed, motor turns automatically to maximum flame
height.
NOTE: If the Timer function has been set and the fireplace is manually turned on, the
Timer function will need to be reset.
Turning the Fireplace Off
1. Press the button to turn the fireplace off.
NOTE: The fireplace may be turned on again after the OFF icon stops flashing.
Flame Height Adjustment
1. To increase flame height, press and hold the
2. To decrease flame height, or to set fireplace to pilot flame only, press and hold the
Radio Frequency
918.0 MHz
(U.S. & Canada) (quality alkaline recommended)
button to desired flame height.
Power Supply
2 x 1.5V AAA batteries
Replace batteries after 2 years or
when low battery indicator appears on
handset display
button.
45