Playback Features - JVC DR-MX1SEF Instructions Manual

Playback Features

Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press VHS/HDD/DVD SELECT
the remote
so that the VHS lamp lights up on the unit.
VHS
2
3
8
REC MODE
AUDIO
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of color.
you cannot hear the sound.
Still Picture/Frame-By-Frame Playback
1
Press 9 to pause during playback.
If there is vertical jitter, press CH +/– to correct the picture.
2
Press 9 to activate frame-by-frame playback.
To resume normal playback, press 4.
Slow Motion
1
Press 9 to pause during playback.
2
Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
The speed changes for each direction by pressing
repeatedly.
To resume normal playback, press 4.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press CH + or – to eliminate the noises.
on the unit repeatedly or VHS
CABLE/DBS
TV DVD
1
DVD
CH+/-
6
4
5
9
PROGRESSIVE
SCAN
and
5
3
High-Speed Search
During playback, press 5 for forward high-speed search, or
3 for reverse high-speed search.
Each press of the button increases the search speed for each
direction.
When pressing
5
on (SP): +5x{+7x
(EP): +11x{+21x
When pressing
3
Once is pressed, reverse search starts in –1x normal playback
3
speed. After this process, each press of
speed between –5x and –7x in SP mode, –11x and –21x in EP mode.
(SP): –1x]–5x{–7x
(EP): –1x]–11x{–21x
To resume normal playback, press 4.
Quick Rewind A Little
During playback (or Live Memory Playback), press
rewinds the picture a little (about 7 seconds) and resumes
playback.
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press
sections.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
To resume normal playback, press 4.
Index Search
Your unit automatically marks
index codes at the beginning of
each recording. This function
gives you quick access to any one
of the 9 index codes in either
direction.
NOTE:
Before starting, make sure the unit is
in the Stop mode.
Press 2 or 6 to activate Index Search. "INDEX –1" or "INDEX 1" is
displayed on the TV screen and search begins in the corresponding
direction.
To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
When the specified index code is located, playback begins
automatically.
BASIC OPERATIONS ON VHS DECK
:
:
changes the search
3
1 to 6 times to skip over unwanted
Current position
Index number
51
EN
. The unit