Table of Contents
Advertisement
8 DIMMER — BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT
: Normally select this.
DIMMED
: To dim the front display panel. (Blue lamp on the front
display panel is turned off.)
8 POWER SAVE — OFF / ON
When this function is set to "ON", you can reduce the power
consumption while the unit is turned off.
During Power Save mode —
— the front display panel will be turned off.
Power Save does not work when —
— the unit is in the Timer mode.
— the unit's power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Program Recording mode is engaged.
(
pg. 59)
It takes some time for the unit to complete initialization after you turn
on the unit power, with "WAKE UP" blinking on the front display
panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to "On-screen Language Set" (
VIDEO IN/OUT
8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
For details, refer to "Monitor Set" (
8 FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO
: To use the [VIDEO] input connector on the front panel.
S-VIDEO
: To use the [S-VIDEO] input connector on the front panel.
8 REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO
: To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO
: To use the [S-VIDEO INPUT] connector on the rear
panel.
.
pg. 21).
pg. 26).
Scan Mode Set
If you connect the unit and TV with Component Video Connection
(
pg. 19), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.
8 Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of the
second half of the picture in-between lines of the first half of the picture.
8 Progressive scan
Progressive scan displays all the horizontal lines of a picture at one time,
as a single frame. This system can convert the interlaced video from DVD
into progressive format for connection to a progressive display. It
dramatically increases the vertical resolution.
ATTENTION:
Your TV needs to be compatible with Progressive.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
HDD
1
Press HDD or DVD so that the HDD or DVD lamp lights up on the unit.
2
Press PROGRESSIVE SCAN for 3 or more seconds.
Video output indicator (
) lights on the front display panel if Progressive
scan mode has been established. (
Each press of PROGRESSIVE SCAN for 3 or more seconds switches the
scan mode.
NOTES:
Interlaced scan mode is the setting at your purchase.
Interlaced scan mode might be suitable depending on video material.
Scan mode cannot be set while menu screen is displayed.
When the Progressive scan mode is engaged, no video signal is
output from [S-VIDEO OUTPUT] connector and [VIDEO/AUDIO
OUTPUT] connectors.
Watch the images on VHS deck in the Progressive scan
mode via component video
1
Set the Progressive-compatible TV to the component input mode.
2
Press HDD or DVD so that the HDD or DVD lamp lights up on the
unit.
3
Press PROGRESSIVE SCAN for 3 or more seconds.
The video output indicator
4
Press VHS so that the VHS lamp lights up on the unit, then press
PROGRESSIVE SCAN.
"COMP OFF" is displayed on the front display panel. It will be displayed for
5 seconds.
5
Press PROGRESSIVE SCAN again within 5 seconds.
"COMP ON" is displayed on the front display panel.
The VHS progressive scan image will then be outputted from the
[COMPONENT VIDEO OUT (Y/P
NOTES:
Be sure to engage the HDD or DVD deck in stop mode.
To disengage the VHS Progressive Scan mode, perform steps
and
5
to switch to "COMP OFF".
SUBSIDIARY SETTINGS
CABLE/DBS
TV
DVD
DVD
PROGRESSIVE SCAN
pg. 14)
lights up on the front display panel.
/P
)] connectors.
B
R
83
EN
4
Hide quick links:
Advertisement
Table of Contents
