Live Memory Playback - JVC DR-MX1SEF Instructions Manual

BASIC OPERATIONS ON DVD DECK
32
EN

Live Memory Playback

Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press DVD so that the DVD lamp lights up on the unit.
This unit records pictures onto the DVD-RAM discs, instead of
video tapes, then plays back the pictures recorded on the discs.
This makes it possible to achieve high-speed writing and read-out
that has not been possible with conventional VCRs, enabling
recording and playback simultaneously.
High-speed spin
Recording
(High-speed writing)
Image figure of DVD-RAM disc
It is called "Live Memory Playback" to start playback of the
program being recorded, with a time-lag between a recording point
and a playback point, as shown in the figure below.
Current playback point
(Live Memory Playback)
Recording start point
0 30 min.
Currently elapsed recording time
Not only can this unit play back a program previously recorded
while recording or timer recording another program, but the unit
also allows you to play back from the beginning of a program while
continuing to record the same program.
Playback
(High-speed read-out)
Current recording position
(Recording point)
Playback Recording
continues continues
1 hour
Recording/playback Status Display
CABLE/DBS
TV
LIVE
ON SCREEN
Live Memory Playback status can be checked by
pressing ON SCREEN to display the bar meter on
the superimpose display.
Press ON SCREEN. The current status is superimposed on the TV
screen.
Bar meter display
Superimpose display
DVD