Recording Features - JVC DR-MX1SEF Instructions Manual

BASIC OPERATIONS ON DVD DECK
42
EN

Recording Features

Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press VHS/HDD/DVD SELECT
the remote
so that the DVD lamp lights up on the unit.
TV / VIDEO
REMAIN
on the unit repeatedly or
DVD
VHS/HDD/DVD
SELECT
DISPLAY
7
CABLE/DBS
TV DVD
DVD
CH+/-
DISPLAY
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
1
Press 7 on the unit to start recording.
2
Press 7 again to engage the ITR mode.
On the front display panel, "0:30" appears.
3
If you want to record for more than 30 minutes, press 7 to
on
extend the time. Each press extends recording time by 30 minutes.
NOTES:
You can only perform ITR using the 7 button on the unit.
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit automatically performs "Relief
Recording" ( pg. 57).
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on
the TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. ( pg. 78)
1
During recording, press TV/VIDEO to select TV mode if your
unit is connected to the TV via the RF connection.
VHS mode is disengaged, and the VIDEO indicator on the front
display panel lights off .
VIDEO
indicator lights off.
The program received on the TV's tuner is displayed on the TV
screen.
2
Slide the TV/CABLE/DBS/DVD switch to TV.
3
Press CH +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)
You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of disc
remaining times for all recording modes appears on the TV screen.