Tray Lock (Dvd Deck Only) - JVC DR-MX1SEF Instructions Manual

— ON /
VIDEO STABILIZER
8
When this function is set to "ON", you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
NOTES:
When you finish viewing a tape, be sure to set this function to "OFF".
Regardless of the setting, this function has no effect during recording
and during special effects playback.
The on-screen display may jitter vertically when this function is set to
"ON".
To watch recordings with close-caption, set this function to "OFF".
8 BLUE BACK — ON / OFF
When this function is set to "ON", the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to "OFF".
8 2ND AUDIO RECORD — ON / OFF
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on L/R
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.
When this function is set to "OFF", the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
The "STEREO" indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
Both "STEREO" and "SAP" indicators appear when a stereo program
is accompanied by SAP sound.
OFF

Tray Lock (DVD Deck Only)

You can lock the disc tray to prohibit the unwanted disc ejection by
children.
Turn off the unit.
To lock tray
While the unit is turned off, press and hold 8, then press x on the
unit. "LOCK" appears on the front display panel and the disc tray is
locked.
To unlock tray
While the unit is turned off, press and hold 8, then press x on the
unit. "UNLOCK" appears on the front display panel.
SUBSIDIARY SETTINGS
EN
x
8
85