Operation; To Use The Unit As A Cd-R/Rw Drive - JVC XR-D400SLE Instructions Manual

Using as a CD -R/RW drive

Operation

To use the unit as a CD-R/RW drive

1
Press POWER.
Make sure the power indicator lights.
2
Press SCSI.
Make sure the SCSI indicator lights up.
3
Turn on the host computer.
Important notes
• Setting the SCSI mode to OFF during using the unit as a CD-R/RW
drive interferes with the operation of the host computer.
• Be sure to operate in the proper order as described above, or the unit
cannot be recognized.
NOTES
• Your computer system and SCSI devices should not be set up in near proximity to
a television or radio as they may cause interference with signal reception.
• Be careful not to set the same ID number to two SCSI devices attached to the same
host computer.
• Be sure to turn off the power supply before changing SCSI ID numbers.
• When you have reset the ID number of a SCSI device, be sure also to reset the host
computer.
• When the SCSI mode is set to OFF, the computer cannot recognize the unit.
• When you use the unit as a CD-R/RW drive, the audio functions (playback,
recording) do not work.
26
1
POWER
POWER
11
SOURCE
SCSI
REC/PLAY
2 3 4 5 6 7 8 9 10
OVER
12 13 14 15 16 17 18 19 20
4x 2x 1x
SPEED
REPEAT 1 TRACK ALL
ERASE
PROGRAM
SPEED REC
FINALIZE
REPEAT
OPEN/CLOSE
SCSI AUTO REC
OPEN/CLOSE
0 OPEN/CLOSE
POWER
SCSI