Using As A Cd-R/Rw Drive; Connecting And Setting; System Configuration; Connecting - JVC XR-D400SLE Instructions Manual

Using as a CD-R/RW drive

Using as a CD -R/RW drive
This chapter explains the operations for using the unit as a CD-R/RW drive.

Connecting and setting

System configuration

The unit may be connected to any host computer equipped with a SCSI
connector, and large amounts of data can be readily processed as desired. CD-
ROM discs may be easily created using the supplied software.

Connecting

• When you make the SCSI connection, turn off the all equipment that you want
to connect. It may damage the unit and connected equipment if you connect
while power is turned on.
• When you make the SCSI connection, the SCSI cable (optional) and the SCSI
card (optional) are required.
HOST Computer
(with SCSI connector)
Connect the SCSI I/O connector of the unit and the computer with a SCSI cable.
24
1 2 3 4 5 6 7 8 9 10
POWER
11 12 13 14 15 16 17 18 19 20
SPEED 4x 2x 1x
REPEAT 1 TRACK ALL
PROGRAM
SPEED REC
FINALIZE
REPEAT
SOURCE
SCSI AUTO REC
REC/PLAY
SCSI cable
(optional)
OVER
ERASE
OPEN/CLOSE
OPEN/CLOSE
When you use the unit as a
CD-R/RW drive, use the
loading tray for REC/PLAY.
LINE SCSI
OUT
ID I / O TERMINATION
L
ON
R
The unit
~ AC IN
OFF