Port Utility; Figure 3-6 Port Utility Submenus - ADTRAN FXO+ DUAL VOICE User Manual

Chapter 3. Operation

Port Utility

1)TIME/DATE
2)FACTORY RESTORE
3)SET PASSCODE
3)UTIL
4)UNIT ID
5)SOFTWARE REV
6)PORT UTILITY
8
Port Utility, a submenu of the TSU 100/120/600 main
menu item Utilities (UTIL) displays the current
software information for each port installed in the
unit. This information is required when requesting
assistance from ADTRAN Technical Support or when
updates are needed.
When Port Utility is displayed, place the cursor on it
and press Enter to display the first available port. See
Figure 3-6.
Display 1.1 FXO+ (scroll to display if necessary), and
press Enter. The unit displays the option module
name and the software version installed.
The submenu Port Utility contains a second option,
2)CMD Mode, for the FXO+ module. This option is
reserved for factory use only.
Press Cancel to exit or select another port.
FXO+ Dual Voice Option Module User Manual
1)SW REVISION
1.1 FXO+
2)CMD MODE
Port Utility Submenus
Figure 3-6
61200.103L2-1