BenQ LW500 User Manual page 41

Disables or enables "Type A connector" 5V power output. To enable this function,
USB Power
select On. Select Off when PointWrite Touch Module is not in use to prevent
Switch
damage.
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language Sets the language for the On-Screen Display (OSD) menus.
• Standby Mode
Standby
Settings
No power is provided from the USB port when the projector is in standby mode.
• Audio Pass Through: The projector can play sound when it is in standby mode
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu. See
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Audio
Settings
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Returns all settings to the factory preset values.
Factory
Default
The following settings will still remain: Keystone, 2D Keystone, Projector Installation, Light
Usage Time, High Altitude Mode, Security Settings, Baud Rate, HDMI Equalizer.
Returns all of the adjustments you've made for the System menu to the factory
Reset System
preset values.
• ECO: The projector maintains at standby mode with less than 0.5W power
consumption.
• Normal: Allows the projector to provide the Audio Pass Through
function in standby mode.
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Background: Sets the background color for the projector.
Screen: Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
in startup and shutdown process.
Connection on page 19
Using the menus on page
Menu operation
/ to
for how to
22.
41