BenQ LW500 User Manual page 35

Color Management
This function provides six sets (RGBCMY) of colors to be adjusted. When you
select each color, you can independently adjust its range and saturation according
to your preference.
Advanced
Color Settings
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
If you selected W, you can modify the color temperature of white by adjusting the
red/green/blue gain.
To return all the settings to the factory default values, highlight Reset, and press
OK.
Light Mode
See
Wall Color
Corrects the projected picture's color when the projection surface such as a
painted wall which may not be white, the Wall Color feature can help correct the
projected picture's colors to prevent possible color difference between the source
and projected pictures. There are several precalibrated colors to choose from:
Light Yellow, Pink, Light Green, Blue, and Blackboard.
Returns all of the adjustments you've made for the Picture menu to the factory
Reset Picture
preset values.
• Primary Color: Selects a color from among R (Red), G (Green), B (Blue), C
(Cyan), M (Magenta), or Y (Yellow).
• Hue: Increase in the range will include colors
consisted of more proportions of its two
adjacent colors. Please refer to the illustration
for how the colors relate to each other.
For example, if you select Red and set its range
at 0, only pure red in the projected picture will
be selected. Increasing its range will include red
close to yellow and red close to magenta.
• Saturation: Adjusts the values to your
preference. Every adjustment made will reflect to
the image immediately. For example, if you select Red and set its value at 0,
only the saturation of pure red will be affected.
• Gain: Adjusts the values to your preference. The contrast level of the
primary color you select will be affected. Every adjustment made will reflect to
the image immediately.
Setting the Light Source Mode on page
RED
Magenta
44.
Yellow
GREEN
Cyan
BLUE
Menu operation 35