2. After the Keystone or 2D Keystone correction page displays. To correct keystoning at the top
of the image, use
keystoning at the right side of the image, use
use
.
(LW500/LH500: Keystone)
Press
.
Adjusting Corner Fit (LW500ST)
You can manually adjust four corners of the image by setting the horizontal and vertical values.
1. Do one of the following steps to display the keystone correction page.
• Press QUICK INSTALL on the remote control. Press
• Go to Advanced menu - Display > Corner Fit and press OK.
2. Press
/ / /
3. Press
/
to adjust vertical values.
4. Press
/
to adjust horizontal values.
18
Positioning your projector
. To correct keystoning at the bottom of the image, use . To correct
Press
to select one corner and press OK.
Exit
. To correct keystoning at the left side of the image,
Press
.
Press
Corner Fit
Press to reset corner value
(LW500ST: 2D Keystone)
.
.
to highlight Corner Fit and press OK.
Press
.
Press
.