Table of Contents
Advertisement
Digital Zoom
Magnifies or reduces the projected image size. After the Digital Zoom page
displays, press ZOOM+/ZOOM- to reduce or magnify the image to a desired size.
Press the directional arrows ( ,
navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Digital Shrink & Shift
Image
Shrinks and/or shifts the projected image.
Resizing
1. After the adjustment bar displays, press
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( ,
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
The native resolution will change according to your selection.
• 16:10: Native resolution in the Information page will show 1280 x 800
accordingly.
• 16:9: Native resolution in the Information page will show 1280 × 720
accordingly. Projection of all aspect ratio will be limited in 1280 × 720 range.
Screen Fill
• 4:3: Native resolution in the Information page will show 1024 x 768 accordingly.
Projection of all aspect ratio will be limited in 1024 x 768 range.
• This function is only available when the input source is HDMI or DisplayPort.
• Aspect Ratio will be fixed at Auto if 16:9 or 4:3 is selected.
Adjusts the image position horizontally. To move the projected image, use the
directional arrow keys.
Digital Lens
Shift
• This function is only available when the input source is HDMI or DisplayPort.
• Once the Screen Fill value is adjusted, the Digital Lens Shift value will be reset to "0".
• This function is not available when the 3D function is activated or when Screen Fill is set at
38
Menu operation
the picture to a desired size.
) to shift the image.
16:10.
,
,
) on the projector or remote control to
/
repeatedly to shrink or magnify
,
,
Advertisement
Table of Contents
