Xblue Networks X16 plus Administration Manual page 13

information and show in image 4.1.2 as follows: (X4U means IP9G)
plus
X16
Then the IP Phone configuration settings will be shown as the following.
Set SIP1 phone number and DSS key. When configured, click the Apply button
to save the configuration for this IP Phone.
•
Note：
◼ Click Apply button at image 4.1.2-2, it will pop up a message that asks to
"Reboot the IP Phone now" or not, If YES, the X16
NOTIFY to the IP Phone to reboot immediately. If No, it will wait for the IP
Phone to do the Auto Provision next time.
◼ If the Xblue IP8g or IP9g LCD screen prompts you to input a username and
password in the course of provisioning, the user can press OK directly.
◼ The WAN IP phone needs to be enabled (shown in image 4.1.1). The user
can upload the default.cfg file in WAN IP phone.
X16plus Administration Manual
image 4.1.2-1 Auto Provision
can configure the IP Phone by clicking on the row of device information,
image 4.1.2-2 Auto Provision
Page 13 of 54
plus
will send a SIP
Rev. 1.1.4