Default Set; Emergency Call - Xblue Networks X16 plus Administration Manual

◼ If user dials 9xxxxxxxxx, item 3 will match the key in digits and length.
System will send 19xxxxxxxxx to the IP trunk group.
3.13 Default Settings
Clear all settings and return the X16
When rebooting the X16
to enter the web.
◼ image 6.7 shows Reset set factory default.

3.14 Emergency Call

plus
The X16 allows you to configure ten Emergency Call numbers and lines with which
Emergency Calls are sent out. Any user can make an Emergency Call regardless of its
Call Routing table, Call Restriction, or when they dial a pre-configured Emergency Call
number. The numbers of Emergency Call must not collide with the numbers in
Numbering Plan.
◼ image 5.2.4 shows set Emergency Call.
X16plus Administration Manual
plus
config to the factory condition.
plus
to the default, Wan IP and Lan IP will not change for the user
image 5.2.4 Emergency Call
Page 19 of 54 Rev. 1.1.4