5.5 The Update Software
The newly released software could be upgraded from the Local PC side or remotely as
shown in image 6.3.1. Click "Browse" to locate the new software image file in the PC.
Then, click "Update" to process the software update.
•
NOTE:
◼ If Factory Default is set to Yes, after the software update complete the
system will reset to the default settings except for the IP address.
◼ The upgrade process takes about 5 minutes to complete, and your X16
system will reboot.
X16plus Administration Manual
image 6.3.1 Upgrade
Page 51 of 54
plus
Rev. 1.1.4