Table of Contents
Advertisement
5.4 Walk Assist
After press 【DOWN】 >2s，the e-bike
uniform speed of 6 Km/h. 6KM flashes on the screen.
"Walk Assist" function can only be used
" function can only be used as pushing the e-bike by hands. Please don't use
when riding.
5.5 Turn on/off the backlight
Turn on/off the backlight
Long press 【UP】 >2s， the backlight is
is insufficient, the LCD backlight can be turned on. Press 【UP】 again>2s，the LCD backlight will be
is insufficient, the LCD backlight can be turned on.
5.6 PAS Level setting
Short press 【UP】 or 【DOWN】
power of the display: 1-5，The default level when the display is turned on is l level.
5.7 Battery indication
When the battery voltage is high, the five-segment LCD is on. When the battery is undervoltage, the outer frame of
When the battery voltage is high, the five
the battery flashes, indicating that the battery is seriously undervoltage and needs to be charged immediately.
the battery flashes, indicating that the battery is seriously undervoltage and needs to be charged immediately.
the battery flashes, indicating that the battery is seriously undervoltage and needs to be charged immediately.
bike enters the mode of power walk assist state. The e
s on the screen.
the backlight is turned on， and turn on the headlight of controller.
to switch the PAS level and change the motor output power. Default
The default level when the display is turned on is l level.
KING-METER TECHNOLOGY
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358
+0086 022 8478 0358 Tel: +0086 022 8478
bike by hands. Please don't use this function
hange the motor output power. Default output
en the battery is undervoltage, the outer frame of
7
METER TECHNOLOGY CO., LTD
. The e-bike will go on at a
controller. When the external light
backlight will be turned off.
Advertisement
Table of Contents
