Table of Contents
Advertisement
8.6 Speed sensor setting
SPS stands for speed sensor. It can be set according to the number of the magnet heads installed on the wheels of
e-bike, and the setting range is 1-9. Short press
and return to the personalized setting interface of display. The default value is 1.
8.7 Throttle Function Setting
Throttle Function Setting
8.7.1Throttle walk assist enable/disable s
assist enable/disable setting
HL means throttle walk assist, HL:N means
HL means throttle walk assist, HL:N means the throttle has no walk assist function, HL:Y means the throttle has
walk assist function, that is, when the throttle is turned, the display enters the walk assist mode.
walk assist function, that is, when the throttle is turned, the display enters the walk assist mode.
walk assist function, that is, when the throttle is turned, the display enters the walk assist mode.
Use 【UP】 and 【DOWN】 to switch Y/N.
vector enable/disable setting interface. Otherwise no response. Long press 【MODE】 to confirm and
vector enable/disable setting interface. Otherwise
display personalized setting interface. The default value is N.
setting interface. The default value is N.
8.7.2Throttle level setting
HF means throttle level setting. HF:N means throt
that when you turn the throttle, the max speed can only reach the corresponding speed corresponding to the level
that when you turn the throttle, the max speed can only reach the corresponding speed corresponding to the level
that when you turn the throttle, the max speed can only reach the corresponding speed corresponding to the level
indicated on the display; If choosing the throttle level disable, it means that when you turn the throttle, the rated
indicated on the display; If choosing the throttle
max speed can be reached without being restricted by the level indicated on the display. Set Y/N through 【UP】
max speed can be reached without being restricted by the level indicated on the display. Set Y/N through
max speed can be reached without being restricted by the level indicated on the display. Set Y/N through
and 【DOWN】. Long press 【MODE
display defaults to N.
It can be set according to the number of the magnet heads installed on the wheels of
It can be set according to the number of the magnet heads installed on the wheels of
9. Short press 【UP】 and 【DOWN】 to change. Long press
setting interface of display. The default value is 1.
to switch Y/N. If choosing N, short press 【MODE】 to confirm.,
HF:N means throttle level disable. If choosing the throttle level enable, it means
MODE】 to confirm and return to the display personalized
KING-METER TECHNOLOGY
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358
+0086 022 8478 0358 Tel: +0086 022 8478
o walk assist function, HL:Y means the throttle has
choosing the throttle level enable, it means
hat when you turn the throttle, the rated
personalized setting interface. The
14
METER TECHNOLOGY CO., LTD
. Long press 【 MODE】 to confirm
to confirm., and enter the throttle
to confirm and return to the
Advertisement
Table of Contents
