Sage Barista Express Impress BES876 Quick Manual page 23

CLEANING CYCLE
NOTE
This is a back-flushing cycle and separate from
descaling.
The CLEAN / DESCALE light
a cleaning cycle is required.
1. Insert the 1 CUP filter basket into the portafilter,
followed by the supplied cleaning disc, followed
by one cleaning tablet.
2. Lock the portafilter into the group head and
place a large container beneath the portafilter
spouts.
3. Ensure the water tank is filled with cold water
and the drip tray is empty.
4. Press the POWER button to switch the
machine off.
5. Press and hold 1 CUP , 2 CUP and the
POWER buttons for 3 seconds.
+
6. The cleaning cycle will commence and last
for approximately 5 minutes. During this time,
water will intermittently flush into the portafilter
to dissolve the cleaning tablet and flush back
into the group head.
will flash when
+
3s
NOTE
No water should come through the portafilter.
7. Remove the portafilter and ensure the tablet
has completely dissolved. If the tablet has not
dissolved; repeat from step 4 of the cleaning
cycle until the tablet is dissolved.
8. Once the tablet has completely dissolved,
remove the cleaning disc, reinsert the portafilter
and press the 2 CUP button to rinse the brew
head. It is recommended to place a container
under the portafilter spout to avoid water
splashing onto the machine. Once complete,
make sure to wipe off any splashes with a soft
dry cloth.
EN
23