Installing The Monitor - Clarion VMA770 Owner's Manual

Installing the monitor

Flush mounting in the headrest
You may use the included bezel to mount the monitor.
1. Ensure that you will have sufficient clearance for the monitor and its rear-located
wiring harness.
2. Cut the opening.
3. Route the pigtail cable end of the wiring harness into the opening from the rear out
the front.
4. Insert the bezel and route the wiring harness through the opening in the rear.
5. Firmly attach the bezel to the mounting surface and/or to the interior of the mounting
surface.
Mounting tabs
6. Connect the wiring harness to the monitor, and tuck the excess wiring harness
length carefully out of the way behind the bezel.
Press edges to
fit monitor into
bezel, do not
press monitor
screen
Mounting screw holes
Monitor
Wire harness opening
Bezel
Spring clips
lock the
monitor in
place