Thank you for purchasing this Clarion product. • Please read this owner’s manual in its entirety before operating this equipment. • After reading this manual, keep it handy, such as in your glove compartment. FCC Approval This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
6. INSTALLATION AND WIRING ...11 What is included in the box ...11 Before starting ...12 Installing the monitor ...12 Wiring the monitor ...15 7. TROUBLESHOOTING ...17 8. SPECIFICATIONS ...18 General specifications ...18 Monitor specifications 9. LIMITED WARRANTY INFORMATION ...19 VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11/23/05, 2:52 PM...
The Clarion 5-inch VMA5096 and 7-inch VMA7196 are high-performance video monitors designed specifically for the mobile environment. Intended for use with other Clarion multimedia products, the monitors can be integrated with many other products as part of a complete mobile video solution.
Keep all liquids, including beverages and cleaning fluids, away from the monitor. Liquids in the monitor can damage the electronics and result in electrical shock or fire. If the unit becomes wet, turn off all power and contact an authorized Clarion dealer to have the monitor inspected.
(Configuration 2). VMA5096_VMA7196_OwnersManual_rev.pmd.p65 Decreases Increases or selects or selects adjustment adjust- settings ment Selects the Video 1/ Video2 settings source 11/23/05, 2:53 PM IR (infrared) receiver for Clarion remote control (hidden behind plastic) VMA5096/VMA7196...
If you have any questions about compatible components, such as system controllers, source units, FM modulators or other audio/video products, contact your authorized Clarion dealer. To operate the monitor, the vehicle ignition key switch must be in the ACC or ON (run) position.
If the temperature is normal and the picture still doesn’t look right, you may adjust the tint, color, brightness, and contrast. 1. Press to display the adjustment menus. MENU The monitor displays the adjustment menus. VMA5096_VMA7196_OwnersManual_rev.pmd.p65 to select the display mode. WIDE Aspect ratio comparisons 11/23/05, 2:53 PM VMA5096/VMA7196...
1. Press MENU several times to locate the IR CH option. 2. Press to alternate between A and B. Note You don’t need to select the IR channel if your vehicle has only one monitor or only one video source. VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 Example of an adjustment bar 11/23/05, 2:53 PM...
Use a soft, dry cloth to gently wipe dust and dirt from the cabinet. Do not use benzene, thinner, car cleaner, or other cleaners. These substances may damage the cabinet or cause the paint to peel. VMA5096_VMA7196_OwnersManual_rev.pmd.p65 on the monitor again or wait for the MENU CAUTION! VMA5096/VMA7196 11/23/05, 2:53 PM...
5. OPERATIONS OF ACCESSORIES Using a remote control The LCD monitor comes with an IR receiver that works with Clarion remote control devices. Aim the remote control at the IR receiver during use. Note The IR receiver only functions with select Clarion multimedia equip- ment.
• Do not open the case. There are no user-serviceable parts inside. If you require assistance, consult your Clarion dealer or an authorized Clarion service center. • Use a soft, dry cloth to clean the screen. Never use a rough cloth, thinner, benzene, alcohol, or other solvent.
Page 13
Mounting tabs Mounting screw holes Wire harness opening 6. Connect the wiring harness to the monitor, and tuck the excess wiring harness length carefully out of the way behind the bezel. VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 Bezel Monitor and bezel 11/23/05, 2:53 PM...
Page 14
Custom mounting using the threaded insert The monitor base has a threaded insert (1/4 - 20) that can be used with the optional Clarion ZMT009 gooseneck mounting kit or with a 1/4 -20 machine screw in custom applications. Location of the threaded insert VMA5096_VMA7196_OwnersManual_rev.pmd.p65...
4. Connect the ground lead (black) securely to a clean metal plate on the vehicle. Use sand paper to remove any paint from the surface where you attach the ground terminal. 5. Reconnect the negative (-) lead to the battery. VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 WARNING! Car battery...
Page 16
Monitor connections Some non-Clarion automotive DVD and VCP source units use a similar connector for an external IR receiver, but use different pin polarity than the Clarion uses. Connecting non-Clarion source equip- ment to this connector could cause equipment damage not covered...
Picture “rolls” or appears B/W Check that the VIDEOSYS setting is correct for the monitors and DVDs being used (see “Changing the Video Output Mode”). PAL video often “rolls” on NTSC monitors. VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 . If the menu appears, check the source unit...
8. Specifications Note The technical data and the design of the equipment may change without prior notice for the sake of technical improvements. VMA5096 General Specifications Power requirement: 12V DC (9V-16V) Power consumpaion: 6.5 watts, power on 0.6 amps (600mA)
5. The sole responsibility of Clarion under this Limited Warranty shall be limited to the repair of the product or replacement of the product, at the sole discretion of Clarion.
Page 20
Clarion Corporation of America All Rights Reserved. Copyright 2006: Clarion Corp. of America Printed in China VMA5096/VMA7196 VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11/23/05, 2:54 PM...
Need help?
Do you have a question about the VMA5096 and is the answer not in the manual?
Questions and answers