Clarion VMA1131 Owner's Manual
Clarion VMA1131 Owner's Manual

Clarion VMA1131 Owner's Manual

Clarion 11" lcd color monitor owner's manual

Advertisement

Quick Links

VMA1131
11" LCD
COLOR MONITOR
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VMA1131 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarion VMA1131

  • Page 1 VMA1131 11” LCD COLOR MONITOR OWNER’S MANUAL...
  • Page 2: Table Of Contents

    Also, save your original sales receipt as proof of purchase. * If using the VMA1131 with the optional TV Tu n e r, please refer to the owner’s manual for the TTX001. TABLE OF CONTENTS Precautions •...
  • Page 3: Package Contents

    • Small black and shiny dots inside the liquid crystal panel are normal for liq- uid crystal products. PACKAGE CONTENTS The Clarion VMA1131 comes with the following items: • Ribbon Cable for connection to the TTX001 TV Tuner • A/V RCA Cable •...
  • Page 4 7 DC Power Connector q VGAInput Connector w Channel Preset Button e Channel Down Button r Channel Up Button 8 Earphone Jack 9 AV2 Input Connectors 0 AV1 Input Connectors t TV Tuner Ribbon Connector y TTX001 TV Tuner (optional) u Antenna Input Connector...
  • Page 5: Installation And Wiring

    3. Be sure to disconnect the battery’s negative terminal before starting. This is to prevent short circuits during installation. NOTE: The VMA1131 cannot be used by itself. It should be connected to a device such as a Clarion TTX001 TV Tuner or a source such as a video cassette player.
  • Page 6: Auxiliary Video Inputs

    AUXILIARY VIDEO INPUTS OPERATION The VMA1131 is equipped with two auxiliary A/V Inputs. 1. Plug the AV1 Audio/Video Input cord into the AV1 and/or AV2 input jacks. 2. Connect Audio/Video Connectors to the Auxiliary Source. 3. Press the Input Selection button on the unit or remote control until VIDEO 1 or VIDEO 2 is displayed.
  • Page 7: Optional Remote Control Operation

    Insert ribbon cable into ribbon cable connector. • Connect external antenna to antenna input connector. Note: When using a TV Tuner with the VMA1131, AV1 Input Connector will be d i s a b l e d . Number Pad...
  • Page 8: Tv Tuning

    TV TUNING If using the TTX001 with the VMA1131, follow these directions to control the TV functions: 1. Be sure TV is chosen as the source to be controlled. 2. Press the Auto Memory button on the remote control to scan available channels.
  • Page 9: Product Specs

    Problem: Picture does not appear. Solution: • The TV Tuner is not set to TV mode (when using the TTX001) – Set the function to TV mode. • The TV Tuner is set to VTR mode (when using the TTX001) – In the VTR mode, no picture appears if no video signal is being input to the VIDEO IN terminal of the tuner.
  • Page 10: Notes

    NOTES...
  • Page 11 NOTES...
  • Page 12 661 W. Redondo Beach Blvd. Gardena, CA 90247 1-800-GO-CLARION www.clarion-usa.com VMA1131-10 Rev.2 (03/00)

Table of Contents

Save PDF