Installing The Side Shelves; Placing The Grease Tray; Installing The Cooking Grids - Pit Boss PB2BPGG Assembly Manual

3. INSTALLING THE SIDE SHELVES

Parts Required:
2 x Side Shelf (#5)
Installation:
• Install each Side Shelf into the side shelf brackets on either side of the
body frame.
NOTE: Insert the corner pins of the mounting side of the shelf into
the brackets at an upward angle, then tilt downward.

4. PLACING THE GREASE TRAY

Parts Required:
1 x Grease Tray (#6)
Installation:
• On the back of the unit, place the Grease Tray into the Grease Tray
brackets, as shown in the illustration.
NOTE: The Grease Tray has an aluminum foil lining for easy cleaning
after cooking. Check regularly and replace the aluminum foil liner if
necessary.

5. INSTALLING THE COOKING GRIDS

Parts Required:
2 x Cooking Grid (#2)
Installation:
• Place the Cooking Grids, side by side, on the grid ledges inside the
Body of the grill.
• The unit is now completely assembled.
Refer to Owner's Manual for Operating Instructions.
4
3
5
4
6
5
2
2
5