Pit Boss Ultimate Griddle Series Owner's Manual

Pit Boss Ultimate Griddle Series Owner's Manual

Hide thumbs Also See for Ultimate Griddle Series:

Advertisement

GRIDDLE WITH LIFT-OFF TOP,
GRIDDLE WITH CABINET
IMPORTANT, READ CAREFULLY, RETAIN FOR FUTURE
REFERENCE. MANUAL MUST BE READ BEFORE
OPERATING!
For outdoor and household use only. Not for commercial use.
WARNING: PLEASE READ THE ENTIRE MANUAL BEFORE INSTALLATION AND USE
OF THIS GAS APPLIANCE. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH. CONTACT LOCAL
BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION
REQUIREMENTS IN YOUR AREA.
OWNER'S MANUAL
PB2BGD2
MODEL / MODÈLE / MODELO / MODELL / MODELLO :
PB2BGD2, PB3BGD2, PB4BGD2, PB5BGD2
PART / PIÈCE / PARTE / TEIL / PARTE :
10807, 10808, 10809, 10810, 10811, 10812,
10813, 10814, 10815, 10816, 10817, 10808
PB3BGD2
PB4BGD2
PB5BGD2

Advertisement

Table of Contents
loading

Summary of Contents for Pit Boss Ultimate Griddle Series

  • Page 1 OWNER'S MANUAL MODEL / MODÈLE / MODELO / MODELL / MODELLO : PB2BGD2, PB3BGD2, PB4BGD2, PB5BGD2 PART / PIÈCE / PARTE / TEIL / PARTE : 10807, 10808, 10809, 10810, 10811, 10812, 10813, 10814, 10815, 10816, 10817, 10808 GRIDDLE WITH LIFT-OFF TOP, GRIDDLE WITH CABINET IMPORTANT, READ CAREFULLY, RETAIN FOR FUTURE REFERENCE.
  • Page 2: Safety Information

    SAFETY INFORMATION MAJOR CAUSES OF APPLIANCE FIRES ARE A RESULT OF POOR MAINTENANCE AND A FAILURE TO MAINTAIN REQUIRED CLEARANCE TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE USED ONLY IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS. Please read and understand this entire manual before attempting to assemble, operate or install the product.
  • Page 3 5. Do not obstruct the flow of combustion and ventilation air to this appliance. Keep the burner tube and portholes clean and free from debris. Clean before use. Regular care and maintenance is required to prolong the lifespan of your unit. Do not modify the appliance.
  • Page 4 SAFETY LISTING In accordance with the procedures and specifications by Conformité Européenne (CE), Pit Boss® Grills gas appliances demonstrates compliance through testing to the standards and directives that comply with all safety, health and environmental protection requirements by the EU (European Union) and the European Economic Area (EEA).
  • Page 5: Table Of Contents

    TABLE OF CONTENTS Safety Information ............2 COPYRIGHT NOTICE Connecting To A Gas Supply Copyright 2021. All right reserved. No part of this manual may be copied, transmitted, transcribed, stored in a retrieval Gas Cylinder Requirements............6 system, in any form or by any means without expressed Installing A Gas Connector To The Manifold ......6 written permission of, Connecting A Gas Cylinder ............
  • Page 6: Connecting To A Gas Supply

    CONNECTING TO A GAS SUPPLY GAS CYLINDER REQUIREMENTS 300mm / To operate, you will need a precision-filled standard G30/G31 grill liquid propane ("LP") 11.8 in gas cylinder with external valve threads. Use standard flexible tube with length less than 1.5 m (59 in). The tube shall be readily visible across its entire length for inspection after installation.
  • Page 7: Connecting A Gas Cylinder

    CONNECTING A GAS CYLINDER IMPORTANT: If the manifold requires a connector, follow the connector installation instructions prior to connecting the unit to a gas cylinder. Before connecting, ensure there is no debris caught in the head of the gas cylinder, head of the regulator valve, or in the head of the burner and burner ports.
  • Page 8: Preparation For Use - Leak Testing

    PREPARATION FOR USE – LEAK TESTING A leak test is used to determine the integrity of a seal. Before using your gas griddle, perform a leak test on the connection between the regulator and the gas cylinder to reduce the risk of serious bodily injury or death from fire or explosion. A leak test should be performed a minimum of once a season, as well as: •...
  • Page 9: Operating Instructions

    With all outdoor appliances, outside weather conditions play a big part in the performance of your griddle and the cooking time needed to perfect your meals. All Pit Boss® Grills units should keep a minimum clearance of 1,270 mm (50 inches) from combustible constructions, and this clearance must be maintained while the unit is operational.
  • Page 10: First Use - Griddle Burn-Off

    FIRST USE – GRIDDLE BURN-OFF Before using your griddle for the first time with food, it is important to complete a burn-off. Start the griddle and operate for a minimum of 15 minutes on HIGH to burn-off the unit. This will “heat clean” the internal components, dissipate odors and rid it of any foreign matter.
  • Page 11: Manual Lighting Procedure

    MANUAL LIGHTING PROCEDURE Open lid during lighting. 2. Set all control knobs to the “O” position. 3. Open the cylinder/gas valve according to the operating instructions on tank. 4. Quickly and carefully, use a lit match or long-nosed lighter to light the burner.
  • Page 12: Lifting The Griddle Off The Cart

    LIFTING THE GRIDDLE OFF THE CART If you have the PB2BPGG, PB3BPGG, PB4BPGG model griddles, they can quickly and easily be lifted off the cart for tailgating or travel. Simply follow the assembly instructions in reverse or the following summary: IMPORTANT: Always ensure the griddle is completely cooled, disconnected from a gas supply, and that the grease cup is removed.
  • Page 13: Using The Trash Bag Holder

    USING THE TRASH BAG HOLDER Trash collection has never been easier with the Trash Bag Holder. Located under the left Side Shelf, this stainless steel frame is easy to clean and works with a standard, regular-sized plastic grocery bag, typically around 10–20 litres (2.5–5 gallons) in volume. The frame is also designed to hold most standard trash bags (with or without handles) up to 60 litres (16 gallons) in volume.
  • Page 14: Care And Maintenance

    CLEANING FREQUENCY Any Pit Boss® unit will give you many years of flavorful service with minimum cleaning. Follow these cleaning and maintenance tips to service your griddle: 1.
  • Page 15: Tips & Techniques

    TIPS & TECHNIQUES Follow these helpful tips and techniques, passed on from Pit Boss owners, our staff, and customers just like you, to become more ® familiar with your grill: 1. FOOD SAFETY • Use different platters and utensils for the cooked meat than the ones you used to prepare or transport the raw meat out to the grill.
  • Page 16: Troubleshooting

    TROUBLESHOOTING Proper cleaning and maintenance will prevent common operational problems. When your griddle is operating poorly, or on a less frequent basis, the following troubleshooting tips may be helpful. For FAQ, please visit www.pitboss-grills.com . You may also contact your local dealer or Customer Care for assistance. WARNING: Always ensure the griddle is completely cooled to avoid injury.
  • Page 17: Replacement Parts

    REPLACEMENT PARTS Part# Description PB2BGD2 Screw (x37) Part# Description Washer (x16) Lid (x1) Locking Washer (x16) Lid Support Rubber (x6) Screw (x4) Wheel Cotter Pin (x2) Lid Support (x1) Hot Plate (x1) Wheel Washer (x2) Hot Plate Leg Screws (x4) Wheel Axle Pin (x2) Lid Handle Bezel (x2) Battery (x1)
  • Page 18 Part# Description PB3BGD2 Screw (x37) Part# Description Washer (x16) Lid (x1) Locking Washer (x16) Lid Support Rubber (x6) Screw (x4) Wheel Cotter Pin (x2) Lid Support (x1) Hot Plate (x1) Wheel Washer (x2) Hot Plate Leg Screws (x4) Wheel Axle Pin (x2) Lid Handle Bezel (x2) Battery (x1) Lid Handle (x1)
  • Page 19 Part# Description PB4BGD2 Screw (x37) Part# Description Washer (x16) Lid (x1) Locking Washer (x16) Lid Support Rubber (x6) Screw (x4) Wheel Cotter Pin (x2) Lid Support (x1) Hot Plate (x1) Wheel Washer (x2) Hot Plate Leg Screws (x4) Wheel Axle Pin (x2) Lid Handle Bezel (x2) Battery (x1) Lid Handle (x1)
  • Page 20 Part# Description PB5BGD2 Screw (x54) Part# Description Screw (x2) Lid (x1) Locking Washer (x14) Lid Support Rubber (x6) Washer (x14) Screw (x14) Lid Support (x1) Lid Handle Bezel (x2) Screw (x6) Lid Handle (x1) Battery (x1) Hot Plate (x1) Burner Crossover (x4) Burner (x5) Grease Cup (x1) Grease Run Out (x1)
  • Page 21: Warranty

    Contact your nearest Pit Boss® Grills dealer for repair or replacement parts. Dansons requires proof of purchase to establish a warranty claim; therefore, retain your original sales receipt or invoice for future reference. The serial and model number of your Pit Boss® can be found directly on the unit. Record numbers below as the label may become worn or illegible.

Table of Contents