White Balance Calculate Region Setting - Omron STC-MBA503POE Product Specifications And User's Manual

Preset white balance 0 to 2
The camera has three preset manual white balances.
Preset white balance setting procedure
1. Selects "Preset 0" to "Preset 2" at "Balance White Auto".
2. Selects adjusting color from Red, Green or Blue at "Balance Ratio Selector".
3. Sets gain for selected adjusting color at "Balance Ratio".
The settings can be save into camera with "User Set Control" function.

White balance calculate region setting

The size and position for white balance gain calculation region are changeable.
GenICam Parameters
BalanceWhiteAuto
RegionSelector
BalanceWhiteAuto
Width
BalanceWhiteAuto
Height
BalanceWhiteAuto
XOffset
BalanceWhiteAuto
YOffset
The white balance calculation region settings are like below:
BalanceWhite
AutoOffsetX
STC-MBA503POE / STC-MCA503POE
Product Specifications and User's Guide
IEnumeration Type White balance gain calculation region selection
Selection: Region 0
IInteger Type Width (horizontal size, in pixel) for white balance gain calculation region
Range: 1 to 2,592
Default: 2,592
IInteger Type Height (vertical size, in line) for white balance gain calculation region
Range: 1 to 1,944
Default: 1,944
IInteger Type Horizontal offset (in pixel) for region 0
Range: 0 to 2,591
Default: 0
IInteger Type Vertical offset (in line) for region 0
Range: 0 to 1,943
Default: 0
White balance gain
calculation region 0
BalanceWhite
AutoWidth
BalanceWhite
AutoOffsetY
BalanceWhite
AutoHeight
No.19S182-01
46/73