Titan TTHTP26 Manual page 24

Operation
NOTE:
special days equipments are allowed to be used and what restrictions apply! Ask
your community for detailed information and observe the regulations in order
to preserve a peaceful neighbourhood and avoid committing administrative
offenses!
Starting the engine
D
>
> Wipe any spilled fuel up before starting.
>
WARNING! Risk of injury!
> Before trying to start the engine, make sure the cutting device does not
touch ground or any objects.
> The cutter blade may start to move during the process of starting. The
throttle control lock-out and throttle control to set the engine run at idle
speed! Strictly follow the starting process as instructions!
NOTE: Risk of equipment damage!
Never twist the starter cord around your hand! Only pull on the handle!
Do not suddenly release the recoil starter handle! Allow the rope to return
slowly and in a controlled manner each time it is pulled!
NOTE:
caused by too much fuel mixture applied at the wrong time and can prevent a
equipment from starting. Follow below procedure:
Remove the spark plug and dry the spark plug. Pull the recoil starter handle
slowly for several times to drain the fuel from the combustion chamber. Wait
the equipment at least 3 metres away before starting the engine to avoid any
equipment as described.
24
5059340124346-TTHTP26-GB-V01.indd 24
TTHTP26
18/9/2020 9:55 AM