Titan TTHTP26 Manual page 18

Before you start
100 ml
200 ml
300 ml
400 ml
4. Unscrew and remove the fuel tank cap (13) (Fig. 7).
5. Fill the fuel into the fuel tank (12). Leave approximately 5 mm of space between
the top of the fuel and the inside edge of the tank to allow for expansion. Do not
overfill (Fig. 8).
6. Wipe up spilled fuel with a soft cloth. Refit and screw the fuel tank cap (13) firmly
(Fig. 7).
7
NOTE: Fuel and oil deteriorate over time. It may be difficult to start the engine
if you use fuel which has been kept for more than 30 days. Towards the end of
the season, it is advisable to put only as much fuel in the tank as you need for
each use, since it should be completely used up before storing the equipment.
Empty remaining fuel from the tank after each use.
18
5059340124346-TTHTP26-GB-V01.indd 18 5059340124346-TTHTP26-GB-V01.indd 18
+ 2.5 ml
+ 5 ml
+ 7.5 ml
+ 10 ml
8
13
12
=
=
=
40:1
=
=
5 mm
TTHTP26
18/9/2020 9:55 AM 18/9/2020 9:55 AM