Haier HP200S1 Operation And Installation Manual page 3

Description of the pictograms
Symbol
Auto mode
-Optimised management of the heat pump and the electrics
for guaranteed comfort；
- Prior using heat pump;
- If compressor works more than the default 8 hours , start
the
- The
can be adjust in the installer settings.
ECO (off-peak) mode
- In this mode ,priority using heat pump,start the Auxiliary
electrical heater
- In two ways using heat pump,should set in the installer
settings in advance ;
01- timer refer to LP parameter;
02-switch signals by power companies.
- In 01 mode, Press SET, press + and - to set Start time of first
Low price L1. Than,set Colsed time of L1.
And than, press SET, to defined for L2.
- In 02 mode, HC light up in Time of use hours, HP light up in
Peak hours.
ECO+ (off-peak) mode
- In this mode ,priority using heat pump, heat pump and Auxiliary
electrical heater are activated only in off-peak time;
- In two ways using heat pump,should set in the installer
settings;
01- timer refer to LP parameter;
02-switch signals by power companies.
- In 01 mode, The Start time and Colsed time settings as the
ECO (off-peak) mode .
Holiday mode
- According to the vacation dates in advance to prepare
hot water;
- For example, you leave home for vacation on January 1st and
return home on January 5th. The date shall be set as
(5-1) =4 days, and corresponding temperature shall also be set.
The heat pump will start heating on 00:00 o'clock of January
5th automatically.
Description
auxiliary power；
compressor maximum continuous working
only in off-peak time;
25
time( )