Operation And Functions; Description Of The Pictograms - Haier HP200S1 Operation And Installation Manual

Operation and functions

Display

Description of the pictograms

Symbol
Power ON/OFF switch
When turned off, the display shows the time and the actual water
temperature. When turned on, the display shows the working
mode.
The default temperature setting is 55°C in the factory. It can be
adjusted simply by pressing + & - directly on the default display.
Working mode selection:Press the key, the AUTO mode, ECO
mode, ECO+ mode,VAC mode is displayed in turn.
Press SET or wait 6 seconds the mode is selected.
Confirm button
Timer adjust:press this key, then Press the + and - to adjust the
time.
Turn on or off fast heating function：Heat pump and Auxiliary
electrical heater are activated at same time.
$
AUTO VAC
ECO ECO+
SET SET
HP HC HP H
ACT ACT
!
START T 1
STOP P
2
ERROR E
Description
24
BOOST
HW