ICP DAS USA LX-8131 User Manual page 10

Step 2: Pull top and bottom locking tabs toward module face. Click indicates lock is engaged.
Step 3: Power on LinPAC
After boot the Linux OS, the LinPAC will automatically launch the application and get the
GPS/GLONASS time to minimize the RTC drift to 1 millisecond. Using
the time's error (the time error < 1ms). Please refer to below diagram:
Tips & Warnings
Sometime the ntpd daemon need to spend 10~20 minutes to minimize the time
error, so the command
than 1ms immediately.
LinPAC + I-8211W User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
"ntpq –p" can't show the symbol 'o' or time error less
version 1.0.1
"ntpq –p" command to check
Page: 10