Barazza 1PIDC30N Use And Installation Manual page 25

Item Meaning
Max. power per
U0
line conductor
Filter setting
U1
U2
Volume for
button tones
U3
Volume for
signal tones
U4
Display
brightness
U5
Timer animation
U7
Behavior
when timer has
run out
Value
Change-
Format
able
Yes 2.4 ... 5
Yes 0,1,2
Yes 0...3
Yes 0...3
Yes 0...9
Yes 0...1
Yes 0...2
25
Remark
Setting the max. allowed power
per line conductor.
The max. power is defined inside
the service menu and can only
be reduced in steps of 0.1 kW
until the minimum power.
Filter changes:
0 - 150h (default)
1 - 300h
2 - 400h
Adjustment of the volume for
button tones
0: no button tones
1: min. volume
2: mid. volume
3: max. volume
Notes:
For normative reasons, button
tones for switching ON and
OFF cannot be disabled. They
will be emitted with last volume
level which has been set before
disabling the button tones.
Tones for errors are always emit-
ted with max. volume (setting 3)
and cannot be disabled
Adjustment of the volume for
signal tones (ex: when timer runs
out)
0: min. volume
...
3: max. volume
Adjustment of the brightness for
the display
0: Max. brightness
...
9: Min. brightness
0: No Timer animation
1: Timer is animated 10 min.
before expiration
0: Signal tone for 120 sec.
1: Signal tone for 10 sec.
2: No tone
EN