Barazza 1PIDC30N Use And Installation Manual page 22

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• Pan detection:
EN
This cooktop is fitted with an interactive control
system that makes it very easy and comfortable
to use. After switching on the cooktop, when you
put a cookware on the glass, the control system
automatically detects it, and the display of rela-
tive cookzone shows 0. You then just have to set
the expected cooking level.
If you remove the pan on that cookzone, the dis-
play shows
.
• Switching the cooking area
ON/OFF:
Put a cookware on the desired cooking zone and
press your finger on L keys zone. Then the com-
mand shows the H zone. Press H key zone to go
to position 9 (max. power) or to go to position 1
(min. power). The power of the single cooking
zone can be adjusted in 9 different positions and
will be shown on the relative luminous display with
a number from "1 to 9".
To swicth OFF that cooking zone you have to
press 0 in the H key zone, and automatically the
display of the zone shows 0 (in the L key zone).
• Booster function:
The booster enables the induction to dissipate a
higher power for a cooking zone for a short period
of time (5 min).
As the booster function may reach high tempera-
tures, it must only be used for cooking processes
using water. Oil or fat may start to burn if booster
is used.
Choose the desire cooking zone L, then type the
P symbol on the H zone. The booster for the se-
lected cooking zone is activated, and now the rel-
ative display shows P.
To remove the function, select a cooking level for
the cooking zone the booster function is current-
ly active. The booster function is terminated and
the cooking zone is heated with the new selected
cooking level.
• Residual heat indication:
If the temperature of the cooking zone is still high
(over 60°) after it has been switched off, the rel-
ative display will indicate the H symbol (residual
heat). The symbol will only switch off when the
burn risk is no longer present.
• Timer function:
There are 2 different types of timers. If ,more than
one timer is set, the timer will always display the
lowest remaining time. Both the timers can be ad-
justed within a range of 1 min to 9 h 59 min.
• Stand alone Timer /
Cooking zone Timer:
The Stand alone timer has the behavior of an
egg timer. To active this function, ensure that no
cooking zone has been selected, the timer show
"--", touch the timer, which display 00 flashing for
the next 10 sec. Adjust the desired start time digit
for digit +/- , do not perform any action for about
5 sec. The timer starts counting backwards. Be-
neath 10 min, the display shows the current time
accurate to the second. If it has reached 0, a sig-
nal tone will be emitted. To change the value of
the Stand-alone timer, the user has to ensure that
no cooking zone has been selected, then touch
the timer key, set the new desired time, and fi-
nally after 5 sec, the timer starts counting back-
wards starting with the new time. To disable this
function, first of all ensure that no cooking zone
has been selected, then touch the timer key, the
current time value is displayed flashing, set the
Stand-alone time to"000", at this point the funcion
is deactivated.
The Cooking zone Timers can be used to switch
a cooking zone OFF automatically after the set
time has run out. To activate this function, the user
can select the corresponding cooking zone, touch
the telative Timer key G, then adjust the desired
start time (+/-), if do not perform any action for
about 5 sec, the timer starts counting backwards.
To change the value of the cooking zone timers,
select the corresponding cooking zone, touch the
time, and set the new desired time (+/-), do not
perform any action for 5 sec., the the timer starts
counting backwards starting with the new time. To
disable this timer, the user have to set the cooking
zone time to "000".
• Pause function:
Pause function is a feature to "freeze" the cooktop
for max. 10 min. For example, if the user is leav-
ing the cooktopfor a short period of time. During
the pause function is active, no cooking zone is
dissipating any power, and all timers (including
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

1pidc60n1pidc80n1pidc90n1pidc120n

Table of Contents