ADC PG-Flex FLL-812 Manual page 82

SCP-FLL812-011-01H
Sub-Menu
Options Descriptions
ISDN Alarm Types Provision ISDN
alarm types
(See Table 24 on
page 102 for ISDN
Alarm Thresholds)
Channel Unit Provision channel
Alarm Types unit alarm types
(See Table 25 on
page 105 for
Channel Unit
Alarm Types)
POTS Options Provision the
ringing frequency
for POTS lines
(See Table 26 on
page 108 for
POTS Options)
LS/GS Options View the Loop
Start/Ground
Start (LS/GS)
circuit
configuration
Set Factory Reset the
Defaults provisionable
items to the
original factory
settings
Channel Allows each
Configuration individual channel
to be set as
enabled or
disabled
70
Sub-Menu
ISDN Alarm Types will be
changed. Continue (Y/N)?
Channel Unit Alarm Types will
be Changed. Continue (Y/N)?
POTS Options will be Changed.
Continue (Y/N)?
Ground/Loop Settings will be
Changed. Continue
(Y/N)?
• Configuration data will be set
to factory defaults (This May
Be Service Affecting!)
Continue (Y/N)?
• Configuration data has been
set to factory defaults. Press
ESC to continue:
• Channel Configuration will
be Changed. Continue
(Y/N)?
• All Channel will be Enabled.
Continue (Y/N)?
• All Channel will be Disabled.
Continue (Y/N)?
Parameters
Y or N
Y or N
Y or N
Y or N
March 13, 2003
Valid
Values
• Y or N
• ESC
• Y or N
• Y or N
• Y or N
ADC Telecommunications, Inc.