ADC PG-Flex FLL-812 Manual page 127

March 13, 2003
CONFIG — Channel Configuration (Continued)
Step
3 The following actions can be taken:
a. To change a field value (enable or disable), press
, or to move to next option.
← →
↑
b. To Enable All Channels, select the ENABLE ALL CHANNELS button, then press
c. To Disable All Channels, select the DISABLE ALL CHANNELS button, then press
d. To save the Channel Configuration changes, select the SAVE SETTINGS button, then press
From the CHANNEL CONFIGURATION WILL BE CHANGED. CONTINUE (Y/N)? prompt, the following
actions can be taken:
• To save the Channel Configuration changes, press
– all current values are set to desired values
• To retain the existing configuration data, press
ADC Telecommunications, Inc.
Action
to toggle to the desired value, or press
SPACEBAR
. The following events occur:
Y
.
N
SCP-FLL812-011-01H
,
↓
.
ENTER
.
ENTER
.
ENTER
115