ADC PG-Flex FLL-812 Manual page 138

SCP-FLL812-011-01H
TEST — Metallic Access (Continued)
Step
4 a. To assign the CU# value, select the CU# field, then press
b. To assign the CH# value, select the CH# field, then press
c. To accept the changes, select the Accept CU#/Channel# and Start Test button, then press
d. From the POTS (CU#, CH#) CHOSEN FOR TEST. **WARNING** CALLS IN PROGRESS ON TEST
CIRCUIT WILL BE TERMINATED. CONTINUE WITH TEST (Y/N)? prompt, the following actions
can be taken:
• To start the test, press
If you decide to stop the test, press
reappears.
• To abort the test, press
126
Action
.
Y
to stop the test. Then press
S
. Then press and the Main Menu appears.
N ESC
to toggle to the desired value.
SPACEBAR
to toggle to the desired value.
SPACEBAR
and the Main Menu screen
ESC
ADC Telecommunications, Inc.
March 13, 2003
.
ENTER