Table of Contents
Advertisement
Wiring the RT
Attaching the Frame Ground, HDSL and Subscriber Line Wires
To install the RT wires, do the following:
This RT does not provide primary protectors on the HDSL or subscriber pairs. The primary protection for
HDSL pairs must be an integral part of the premises wiring. If the subscriber wiring is routed outside of
the premises for any reason, then primary protection for subscriber pairs must also be an integral part of
the premise wiring.
1
Open the Telco Access door as shown in
2
Insert the Tip and Ring wires through the hole below the Telco Access door.
10
Figure
7.
P G
M O
R E
R M
T E
Figure 7. Opening the Telco Access Door
January 6, 2003
s
P l u
Latch
e x
- F l
T E
A L
I N
Access door
SCP-PRL779-015-04H
PRL-779 List 1E
Advertisement
Table of Contents
