ADC PG-PLUS PRL-779 Manual page 21

SCP-PRL779-015-04H
3 For the FGND and Subscriber Line wires, pivot the IDC connector upward, then insert the wire pair through
the tip and ring holes (see
American Wire Gauge (AWG) with a maximum insulation diameter of 1.52 mm.
4 Press the IDC connector downward to secure the FGND and Subscriber Line wires (see
Figure 9. Attaching the FGND, HDSL and Subscriber Line wires
5 Repeat steps 2 through 4 to attach the HDSL wires.
6 Close the Telco Access door.
PRL-779 List 1E
Figure 8). Each wire entry hole accepts one unstripped solid copper wire 22-24
Figure 8. Attaching the RT Wires
January 6, 2003
Wiring the RT
Figure 9).
11