Table of Contents
Advertisement
Menu buttons
300065/A
tabs for each display mode. In order to select a new menu, move
the cursor to the tab, and press the
Control Panel.
(D) Active menu: The next field contains the actual menu.
Depending on operational mode and the menu properties, this
menu can contain a number of buttons or other information.
(E) Menu button: Each menu button allows you to define the
parameters for the specific function.
(F) Parameter dialogue: When a menu button is pushed, the
applicable dialogue with a selection of parameters appears at
the bottom of the menu.
Each menu contains several buttons. Each button shows both the
function and the current parameter. The majority of the buttons
in each menu field have three functions.
• You can select a lower parameter value.
• You can select a higher parameter value.
• You can open the applicable parameter dialogue.
-
+
C
A
B
(A) Decrease: Position the cursor on the left side the button.
Observe the arrow symbol change to a minus sign. Decrease the
parameter by pressing the
Panel.
(B) Increase: Position the cursor on the right side the button.
Observe the arrow symbol change to a plus sign. Increase the
parameter by pressing the
Panel.
(C) Parameter dialogue: Position the cursor on the centre of
the menu button. Observe the arrow symbol change to a menu
symbol. Open the parameter dialogue by pressing the
button on the Sonar Control Panel. The dialogue appears in
the lower part of the menu field, providing an overview of the
available options.
button on the Sonar
Select
(C
D015010A
)
button on the Sonar Control
Select
button on the Sonar Control
Select
Using the menus
Select
15
Advertisement
Table of Contents
