Table of Contents
Advertisement
300065/A
Mode
These four buttons provide fast access to the four operational
modes you select, or to four pre-defined user configurations. You
must select which four modes or user configurations to select,
and in which order they shall appear. To choose button function,
click
button on the
Mode
operational modes, click
Gain
This is where you set up the gain in both horizontal and vertical
plane.
Range
This is where you select horizontal and vertical range.
Cursor
The trackball is used to move the cursor on the display. The
button is used to hide the menu, while the
Menu
used to make selections on the display. The
buttons open specific short-cut menus.
Tilt
In this field you find the buttons used to tilt the sonar beam up
or down. You can also start an automatic tilt program to carry
out automatic searches.
Train
This field contains the button to control the sideways movements
(training) of the sonar beam. You can also start an automatic
training program to carry out automatic searches, and you can
lock the beam on a chosen target or position.
Various
Here you can find buttons to disable the speaker, start a recording
and to zoom in on the sonar picture.
Sonar control panel
menu. To define the order of the
Display
on the
Sort modes
System
View
menu.
button is
Select
and
Object
11
Advertisement
Table of Contents
