Table of Contents
Advertisement
Copyright © 2014, Juniper Networks, Inc.
Lift the wheels up by turning the handles counterclockwise so that the weight of the
6.
router is on the router transport platform.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
7.
transport mounting plates and wheel assembly to the chassis, and set them aside
(see
Figure 31 on page
41).
Figure 31: Remove Router Transport Mounting Plate and Wheel Assembly
Grasping the handles on the shipping covers, carefully slide the router into the rack
8.
until the center mounting brackets contact the rack rails (see
Use the Router Transport Kit to Install the Router In an Open-Frame Rack
Figure 32 on page
42).
41
Advertisement
Table of Contents
