Table of Contents
Advertisement
English
Specifications
Total Harmonic Distortion (20 Hz - 20k Hz)
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Output Level
Line Level (RCA)
Balanced (XLR)
Frequency Response:
Phono Input
Line Level Inputs
Signal to Noise Ratio (A weighting)
Phono Input
Line Level Inputs
Channel Separation
Phono Input
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio (A weighting)
Digital Inputs
PC-USB
General
Power Requirements:
USA:
EC:
Power Consumption
Standby Power Consumption
BTU
Dimensions (W x H x D)
Front Panel Height
Weight (net)
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co., Ltd, Tokyo,
Japan.
< 0.002%
2.5 mV / 47k ohms
150 mV / 100k ohms
250 mV / 100k ohms
1 V
2 V
20 Hz - 20k Hz, 0 ± 0.2 dB
10 Hz - 100k Hz, 0 ± 0.1 dB
80 dB
112 dB
> 75 dB
> 75 dB
20Hz - 20kHz
±
(
0.5 dB, Max)
108 dB
SPDIF LPCM
(up to 192kHz 24 bit)
USB Audio Class 1.0
(up to 96kHz 24 bit)
USB Audio Class 2.0
(up to 384kHz 32bit)*
*Driver installation required
120 Volts, 60 Hz
230 Volts, 50 Hz
45 watts
< 0.5 watts
78 BTU/h
431 x 144 x 348 mm
(17 x 5
/
x 13
/
ins)
11
7
16
9
3U (132.6 mm, 5
/
ins)
1
4
9.2 kg, 20.28 lbs.
"Made for iPod," and "Made for iPhone," means that an electronic accessory
has been designed to connect specifically to iPod or iPhone, respectively, and
has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
17
Advertisement
Table of Contents
