Advertisement
SPECIFICATIONS
Continuous Power Output .. 100 watts' per channel, min.
RMS both channels driven
into 8 ohms from 20 to
20,000Hz with no more than
0.03% total harmonic distortion.
DIN Power Output. 200 watts per channel (1kHz,
4 ohms, 1% THD)
Peak Current.50A
(0.1 ohms, 10/isec, 1 pulse).
Bridged Power. 300 watts (mono) min. RMS
driven into 8 ohms from 20 to
20,000Hz with no more than
0.05% total harmonic distortion.
Total Harmonic Distortion
(20 to 20.000Hz). No more than 0.03% (con¬
tinuous rated power output)
No more than 0.03% (con¬
tinuous 112 rated power output)
No more than 0.03% (1 watts
per channel power output, 8
ohms)
Intermoduration Distortion
(60Hz: 7kHz = 4:1). No more than 0.03% (con¬
tinuous rated power output)
No more than 0.03% (con¬
tinuous 1/2 rated power output)
No more than 0.03% (1 watt
per channel power output,
8 ohms)
Output. Speaker 8 ohms nominal
Damping Factor. 180 (20 to 20,000Hz, 8 ohms)
Input Sensitivity/
Impedance. 1.0V/2 kohms
Frequency Response.4 to 100,000 Hz, +0.5dB,
-3.0dB
Signal-to-Noise Ratio
(IHF A network). 110dB
Power Requirement. 120V/60Hz, 220W50Hz,
240V/50HZ or 120, 220,
240V/50Hz-60Hz (switchable)
(depending on destinations)
Power Consumption. 500 watts
Dimentions (overall). 430 (W) x 109 (H) x 315 (D)mm
16-15/16' x 4-7/32' x
12-13/32'
Weight (net).9 4kg/20 68 lbs.
• Specifications and design subject to possible modification
without notice.
' Measured pursuant to the Federal Trade Commission's
Trade Regulation Rule on Power Claims for Amplifiers
(applicable to the U.S.A. only).
Advertisement
