Advertisement
SPECIFICATIONS
Continuous Power Output.60 watts* per channel, min. RMS both
channels driven into 8 ohms from 20
to 20,000 Hz with no more than 0.03%
total harmonic distortion.
DIN Output.118 watts per channel (1 kHz, 4 ohms,
1% THO)
Power Output (BTL).120 watts (mono) min. RMS driven
(When used with RB-870
into 8 ohms from 20 to 20,000 Hz
power amp.)
with no more than 0.03% total
harmonic distortion.
Total Harmonic Distortion.No more than 0.03% (continuous rated
(20 to 20,000 Hz. from TUNER) power output)
No more than 0.03% (continuous 1/2
rated power output)
No more than 0.05% (1 watt per
channel power output, 8 ohms)
Intermodulation Distortion ... .No more than 0.05% (continuous
(60 Hz : 7 kHz =4 : 1)
rated power output)
No more then 0.05% (continuous
1/2 rated power output)
No more than 0.05% (1 watt per
channel power output, 8 ohms)
Output: Speaker.8-16 ohms
Headphone.4-16 ohms
Damping Factor.280 (20 to 20.000 Hz. 8 ohms)
Input Sensitivity/Impedance:
PHONO (MC).0.2 mV/200 ohms
PHONO (MM).2.5 mV/47 kohms
CD.750 mV/39 kohms
TUNER.150 mV/47 kohms
TAPE MONITOR 1,2.150 mV/47 kohms
Overload Level (T.H.D.0.01%, Ik Hz):
PHONO (MC).27mV
PHONO (MM).300mV
CD, TUNER, TAPE.5V
Frequency Response:
PHONO.20 to 20.000 Hz, »0.2 dB (RIAA STD)
CD, TUNER, TAPE.20 to 30,000 Hz, -K) dB, -1.0 dB
Signal-to-Noise Ratio (IHF, A network):
PHONO (MC).70 dB
PHONO (MM).80 d8
CD, TUNER, TAPE.102 dB
MISCELLANEOUS
Power Requirement.120V/60 Hz. 220V/50 Hz, 240V/50 Hz.
or 120, 220, 240V/50-60 Hz (switchable)
(depending on destinations)
Power Consumption.500 watts
Dimensions (overall).430 (W) x 91 (H) x 317 ID) mm
16-15/16" x 3-9/16" x 12-15/32"
Weight (net).9*8 kg/21.56 lbs.
•
Specifications and design subject to possible modification without
notice.
•Measured pursuant to the Federal Trade Commission's Trade
Regulation Rule on Power Claims for Amplifiers (applicable to the
U.S.A. only).
4
Advertisement
