Table of Contents
Advertisement
10 Maintenance and repair
10�1 Cleaning and care
Damage to seals and electronics/electrics due to mechanical effects!
The water jet of a high-pressure cleaner may damage the seals and
electronics/electrics of the sensor!
▶ Do not point the high-pressure cleaner directly towards sensors.
For cleaning and care of the sensor, observe the following:
▶ Check whether all the seals and fittings on the plug-in connections are securely
seated to ensure that no moisture can penetrate into the sensor and the
installation space during cleaning.
▶ Use only water and, if necessary, a mild cleaning agent to clean the sensor.
Never use solvents or aggressive cleaning agents.
10�2 Inspection and maintenance
No special activities are necessary.
10�3 Repair
The sensor cannot be repaired.
When replacing the sensor, make sure that no contamination can penetrate the
hydraulic system and that the sealing surface of the sensor is not damaged.
▶ Only use original spare sensor from Rexroth, otherwise the functional reliability
cannot be guaranteed, and the warranty will be voided.
▶ Spare parts can be found online at www.boschrexroth.com/eshop
Address all questions regarding repair to your responsible Bosch Rexroth service.
Maintenance and repair | PSM
NOTICE
RE 95190-B/2021-08-12, Bosch Rexroth AG
19/24
Advertisement
Table of Contents
