Modification; General Characteristics And Technical Specifications - UV MEDICO UV222 Installation Manual

It is strictly forbidden to override these safety devices or to use the Product if the safety
features are not fully present or disfunction.
The safety features should be regularly checked for their proper functioning, and if
required, be immediately repaired or replaced.
The pictograms, warnings and instructions attached to the Product are part of its safety
features. They must not be covered or removed and must be present and legible during the
entire use of the Product.
Immediately replace or repair missing, damaged or illegible pictograms, warnings and
instructions.

3.4. Modification

No modification of the product is allowed. All warranty and liability are void if any modifica-
tions are done to the UV222.
4. GENERAL CHARACTERISTICS AND TECHNICAL
SPECIFICATIONS
The Product is designed to emit Far UV-C radiation with a wavelength of 222 nm, in order
to eliminate viruses, bacteria, fungi, and other pathogens, from air and surfaces.
The Far UV-C lamps are designed for 5,000 hours of efficient operation. Far UV-C lamps
used longer than this, may no longer emit the required level of ultraviolet radiation to en-
sure the desired germicidal efficacy on harmful microorganisms.
Technical data
Light Source
Wavelength
UV output power
Input voltage
Max power consumption
Weight
Dimensions
Power lead
Operating temperature
UV222 Technical & Installation Manual
6
Kr-Cl Excimer lamp
222 nm
130 mW (typical)
85-305V AC 50/60HZ
17 W
1.9 KG
303.45 x 120 x 75.25
3 x 0.75 mm² -18AWG
0 to +50°C