Understanding The Unit's Operation; Setting Up The Uv222 - UV MEDICO UV222 Installation Manual

Hide thumbs Also See for UV222:

Table of Contents

6.5. Understanding the unit's operation

The maximum permissible UV-C exposure shall not exceed the ACGIH TLV and NIOSH REL

of 22,0 mJ/cm² for an 8 h day, 40 h work week exposure to UV radiation at 222 nm.

(UV Medico A/S expects positive changes into the ACGIH that will result in a higher expo-

sure than allowed at this moment. If this changes, UV Medico A/S will update the software

of the unit to align with the new threshold of exposure).

To achieve the correct radiation within these limits, following information will be pro-

grammed into the UV222 before the start-up of this installation.

The installer will need a Microsoft Windows computer with the UVMEDICO application

installed. Contact your distributor to get access to the latest software and firmware for the

UV222.

To launch the app, go to the installed folder and open the file:

UV Medico Configuration App.exe

The app includes two different set up modes: simple and advanced.

For the simple mode, follow the instructions that will appear on the screen.

For the advanced mode, see below:

There is a USB-C connection

side of the unit to connect to a computer

with a USB cable.

Connect your computer to the UV222

unit and it will show up automatically on

the application.

When the app is launched, following

steps needs to be taken:

on the

Table of Contents

Do you have a question about the UV222 and is the answer not in the manual?