Activate Your Wireless Account; Insert Sim Card Into Holder - Multitech MultiModem iCell Quick Start Manual

Activate Your Wireless Account

Please refer to the wireless account Activation Notices included with
your unit and located on the MultiModem CD. Choose the one for
your wireless network provider and follow the directions to activate
your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The
phone number may simply be given to you by your wireless service
provider or it may also be on the SIM card or both. Wireless provider
implementations may vary.
Insert SIM Card into Holder, if required
The MultiModem requires the power supply connection to begin
operation. It also requires a SIM card (Subscriber Identity Module) to
operate on a GSM network. To install the SIM, do the following:
1. Using a small Phillips screwdriver, remove the two SIM door
screws and remove the SIM door.
Note:
from the unit.
2. Insert the SIM card into the card holder. The above figure
illustrates the correct SIM card orientation.
3. Verify that the SIM card fits properly; then replace the door.
Multi-Tech Systems, Inc. Quick Start Guide
Downloaded from Elcodis.com electronic components distributor
MultiModem iCell Intelligent Wireless Modem
When changing a SIM, ensure that power is removed
5