Chapter 2 - Activation And Installation; Activate Your Wireless Account; Hook Up The Antenna, Serial Cable, And Power - Multitech MTCBA-C User Manual

Chapter 2 – Activation and

Activate Your Wireless Account

Pre-Configured Multi-Tech Products
Each Multi-Tech wireless product has been pre-configured to operate on a wireless network. However, Multi-
Tech offers some models that are not pre-configured.
Activate Your Wireless Account
Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your
wireless network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The phone number will be given to you by your
wireless service provider. Wireless provider implementations may vary.
Hook up the Antenna, Serial Cable, and
Power
1. Connect a suitable antenna to the SMA connector (see antenna specifications on page 9).
2. Connect both sides of the serial and control cable (15-pin Sub D connector on the modem side).
3. Plug the power supply cable into the modem.
For two-piece transformer power supply (International).
•
Connect the AC cord receptacle into the transformer block.
•
Connect the AC cord plug into the power outlet.
For one-piece transformer power supply (North America).
•
Connect between the MultiModem power receptacle and the power outlet.
Multi-Tech Systems, Inc. MultiModem CDMA Wireless Modem User Guide
Installation
Chapter 2 – Activation and Installation
11