PROAIM Flycam SW-015-00 Assembly Manual

Swivel

Swivel

(SW-015-00)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Rod

Allen Key (3mm, 4mm 3/16mm)

4 x Bush

Flycam swivel

Ronin Adapter Plate

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable

Table of Contents

Need help?

Do you have a question about the Flycam SW-015-00 and is the answer not in the manual?

Page 1 Swivel (SW-015-00) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Allen Key (3mm, 4mm 3/16mm) 4 x Bush Flycam swivel Ronin Adapter Plate...
Page 2 Swivel Setup • Remove the end cap of the rod. • Loosen the bolts of the Flycam swivel with the help of a 4mm Allen key and insert the rod. • Tighten the bolt of the Flycam swivel with a 4mm Allen Key.
Page 3 • Remove the 4 X bolt, as shown in the image. • Now separate the top part of the swivel. • Remove the screw bush by removing the handlebar. • Remove all the screw bush as shown in the image. •...
Page 4 • Then insert the bolt and tighten it properly with the help of a 4mm Allen key. DJI Ronin Gimbal (Not Included) • Loosen the knob of the DJI Ronin handle (Not Included). • Remove the handle and insert it into the swivel.
Page 5 • Insert the Flycam swivel by sliding it onto the DJI Ronin gimbal (Not-Included). lock the gimbal with the locking lever of the swivel plate. • The Flycam swivel is now properly attached with DJI Ronin Gimbal (Not-Included). YOUR FLYCAM SWIVEL ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase.