Advertisement
7
Note: ensure the back panel (P5) slots all the
way into the groove on the bottom panel (P2).
Slide the 2 x back panels (P5) into the grooves of the bottom,
left and right panels (P2, P3, P4) as shown.
8
4 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Insert 4 x cam nuts (H2) into the top of the left and right panels (P3, P4), rotating the cam nuts so
the arrows point towards the incoming cam bolts.
With assistance, carefully align and lower the top panel (P1) onto the assembled
unit as shown.
Secure the panels together by tightening the cam bolts (H2) on the left and
right panels (P3, P4) using a phillips head screwdriver.
P5
P1
Note: ensure the back panel (P5) slots
into the groove on the top panel (P1).
Page 8
Advertisement
